High Density Siemens SMT Machine Spare Parts Miniature Roller Table 00320165

Miniature Roller Table Siemens Replacement Parts 00320165 Test in machine before shipping:

Product Advantages:

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

1. Smaller components.

2. Much higher component density (components per unit area) and many more connections per component.

3. Components can be placed on both sides of the circuit board.

4. Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

Product Specification:

Supply Details:

Sell & Repair SMT machine and spare parts:

SMT Application:

Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these smt components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.

Stock Adequate: