Lightweight Siemens Electrical Unit , 00330938 Deflection Unit X For SMT Machine

Siemens Deflection Unit X 00330938 To SMT Pick And Place Machine Supply original new or used and repair service:

Description:

Surface mounting was originally called "planar mounting".

Surface-mount technology was developed in the 1960s and became widely used in the mid 1980s. By the late 1990s, the great majority of high-tech electronic printed circuit assemblies were dominated by surface mount devices. Much of the pioneering work in this technology was done by IBM. The design approach first demonstrated by IBM in 1960 in a small-scale computer was later applied in the launch Vehicle Digital Computer used in the Instrument Unit that guided all Saturn IB and Saturn V vehicles. Components were mechanically redesigned to have small metal tabs or end caps that could be directly soldered to the surface of the PCB. Components became much smaller and component placement on both sides of a board became far more common with surface mounting than through-hole mounting, allowing much higher circuit densities and smaller circuit boards and, in turn, machines or subassemblies containing the boards.

Specifications:

Supply Ability

Supply all original new and used SIEMENS spare parts at good price:

• SIEMENS VALVE PLUNGER SP12 00351498-03
• SIEMENS 80S15 X MOTOR BB58.82.11-SN3-S
• SIEMENS 00119032
• SIEMENS CAMERA 00315224-06
• SIEMENS RV6 CAMERA 00346264
• SIEMENS NOZZLE 418 00322544-03
• SIEMENS NOZZLE 901 00322603-04
• SIEMENS NOZZLE 904 00322602-05
• SIEMENS NOZZLE 913 00345020-03
• SIEMENS NOZZLE 915 00321862-07
• SIEMENS NOZZLE 917 00321863-05
• SIEMENS NOZZLE 918 00321864-07
• SIEMENS NOZZLE 921 00325970-04

Related Details

SMT Application

Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these SMT components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.