SAKI BF-3di SMT AOI Machine 2D 3D Thickness 0.6-5.2mm Durable

SAKI BF - 3 BF - 3 di di AOI optical detector can obtain 2 d and 3 d images at the same time:

SAKI BF - 3 di AOI SAKI online online AOI automatic optical detector BF - 3 di function introduction: 1.1 projection system principle - 2 d + 3 d detection SAKI online online AOI automatic optical detector BF - 3 di can obtain 2 d and 3 d images at the same time

SAKI online online AOI automatic optical detector BF - 3 di function introduction:

1.1 projection system principle - 2 d + 3 d detection

SAKI online online AOI automatic optical detector BF - 3 di can obtain 2 d and 3 d images at the same time

030 JPG

The whole plate 3 d detection

SAKI online online AOI automatic optical detector BF - 3 di use stripe light projection phase system can calculate the accurate height information. This is other technology is difficult to achieve.

4 direction stripe light projection technology

With four direction projection to test the components. Angles of light stripe can avoid the shadow effect on the test results.

If you use the projection of two groups, high component of shade, can affect the height of the area of the test. The BF - 3 di use four direction projection, in an area where a high element, can use other Angle projection system to complete the height of the high accuracy of detection.

SAKI online AOI perfect corresponding to various component types

SAKI online online BF - 3 di AOI automatic optical detector using multiple sets of stripe light system. Through the projection width pattern of black and white stripe, light can be steady precision measure the height information of all kinds of elements. For example: 0402 mm components, IC ontology of black, as well as the mirror material components.

1.2 / BF - 3 di online AOI projection principle -

1.2.2 the largest measuring height: 20 mm

BF - 3 di online AOI from general solder joints to connector, all can accurately measure height measurement has reached 20 mm, there are many different components on PCB need to detect. BF - 3 di IC can check from the dense foot height elements such as tin to tantalum capacitor, the height measurement range is wide, which can reach the height of the whole board 3 d measurement.

2.1 SAKI AOI innovations - tiny components of online detection

Perfect 0402 mm Chip components detect tiny components will be the future of the application of the SMT industry is a trend, the BF - 3 di detection can perfect response is short of the element is 0402 mm deviation, as well as the float type testing requirements. 3 BF - di can through the measurement of height of perfect response to traditional 2 d AOI in all the testing difficulties after welding, achieve stability precision test

Shenzhen letter surplus lung electronic technology co., LTD., dedicated to electronic manufacturers to provide SMT equipment as follows:

MPM printer, Koh Young SPI, Easa reflow soldering

Siemens placement machine, FUJI FUJI SMT machine, panasonic SMT machine

The AOI, lu Vitronics Soltec reflow soldering, non-standard automation equipment, SMT machine rental lease

The SMT production line equipment, and SMT components, SMT supplementary materials, services and solutions.

Many electronics manufacturers say: no matter where SIPLACEX series of nominal value can reach the maximum velocity and absolute required

Precision (applicable to mobile phones, tablet PC, laptop computers, LED mount, etc.).
Provide the customers with top speed, the lowest DPM, the stability of the 0201 (metric system) to handle ability, no line set up conversion and rapid new product import, and other functions.
SIPLACEX series cantilever modular function, can provide 2, 3 or 4 cantilever.
Hard to believe? We look forward to receiving your letter - equipment compare with other manufacturers.

Understand SIPLACEX series of how to optimize the special production process, how to quickly recoup their investment, and it has other competitive advantage.