Low Radiation YG200 Yamaha SMT Machine Electronic Mounting Speed 0.06s/Chip

Yamaha SMT machine YS100 ability of high-speed SMT machine stability in high precision

YAMAH YG200 SMT machine features:

1. The ultra high speed and high precision SMT machine; 

2. 0.08 seconds/CHP ultra-high-speed SMT (best conditions); 

3. IPC9850 state, the patch speeds of up to 34800 CPH; 

4. To ensure that the entire SMT precision up to + 50 microns, it repeated up to plus or minus 30 microns; 

5. Mount range from 0201 (English) miniature components to 14 mm components; 

6. The use of four high resolution visual digital camera; 

7. Can choose the flight with YAMAHA patent in mouth, can effectively reduce the idling loss; 

8. The best choice of the ultra-high speed production; 

SMT Advantage:
Surface mount technology, SMT and its associated surface mount devices, SMDs considerably speed up PCB assembly as the components simply mount on the board. 
Look inside any piece of commercially made electronic equipment these days and it is filled with minute devices. Rather than using traditional components with wire leads like those that may be used for home construction and kits, these components are mounted onto the surface of the boards and many are minute in size. 

1. Good mechanical performance under shock and vibration conditions. (Partly due to lower mass, and partly due to less cantilevering.)

2. Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance. 

3. Better EMC performance (lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the lesser lead inductance. 

4. Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.) 

5. Reasonable initial cost and time of setting up for mass production, using automated equipments.  

The basic parameters:
Brand: YAMAHA
Product model: YG200
Substrate size: L50xW50mm - L510xW460mm
Mount speed: 60000 CPH (0.06 S) chip
Material stance: 216 stance (8 mm double braid feida)
Machine precision: plus or minus 50 microns (CPK ≧ 1) chip
Element size: 0201 - L24 x W24mm chip

Shenzhen letter surplus lung electronics co., LTD., dedicated to electronic manufacturers to provide SMT equipment as follows:

MPM printer, Koh Young SPI, Easa reflow soldering

Siemens placement machine, FUJI FUJI SMT machine, panasonic SMT machine

The AOI, lu Vitronics Soltec reflow soldering, non-standard automation equipment, SMT machine rental lease

The SMT production line equipment, and SMT components, SMT supplementary materials, services and solutions.